Slurry Gate is an accessory for trash pumps DOA models SP45 - SP55 - SP65. The accessory is a set formed by:
• SG4 - SG6 body and cylinder, this element to be installed on the pump outlet mouth.
• Hydraulic control valve and hoses that can control the opening/ closing action of the slurry gate.
The Slurry Gate is a “retrofit accessory” that can be installed on pumps, its action as mixer is necessary when the liquid to pump is very thick and have suspended solids (like sediments, mud balls or oil balls or other agglomerate of semi solid/ pasty liquids) the above must be disintegrated to become more fluid and pumped, is needed also to avoid choke at the pump inlet. After some minutes of this treatment the liquid can be pumped easyer and the pump will run in its natural function. The length of the hydraulic pipe that connects the three-position valve to the mixer body must be prepared by the customer or ordered at DOA at the time of purchase.